VORON V0 Customized Kit

Description

**If there is any problem with your order, we would contact you by E-Mail/Whatsapp. Please confirm your contact is work**

**We would follow this shipping schedule**

Order Month	Shipping Period
March	Late-April
April	Late-May
May	Late-June
June	Late-July

**If some components are shortage, we would try to prepare for you as possible as we can but cause a little bit of delay**

Attention:

The Kit Do Not Include But You Also Need To Prepare

• PEI Sheet/Spring Steel
• Raspberry Pi

Other:

Panels are 3mm for PC/ABS.

For the Printed Parts, we strongly suggest you order from Voron PrintItFoward Program to ensure you receive high-quality, functional parts.

https://pif.voron.dev/

What In The Basic Part:

BASIC	Fasteners	3x7x0.5 Shim Ring	26	40
		3x5x0.5 Shim Ring	4	10
		M2 Nut	25-50	70
		M3 Nut	164	180
		M5 Nut	2	5
		M2x6 BHCS	33-58	70
		M2x8 SHCS	12	20
		M3x6 BHCS	51	60
		M3x8 BHCS	61	70
		M3x10 BHCS	27	35
		M3x12 BHCS	23	35
		M3x25 BHCS	7	10
		M3x30 BHCS	12	15
		M3x35 BHCS	35	50
		M3x40 BHCS	3	5
		M3 Thumb Nut	3	5
		M5x35mm BHCS	2	5
		M2x10 Self Tapping Screws for Plastic	11	20
		M3 Brass Heatstake Inserts – Short	20	30
		Makerbeam XL M3 t-nut	2	3	the same size
		Nylon standoffs	–	–	a small bag
	Electronics	Meanwell LRS-100-24	1	1
		DC/DC PSU/buck converter – 24V to 5V	1	1
		Crydom ED24D3 SSR – or –  KNACRO 1-Channel SSR	1	1	other models Instead
		3010 blower fans 24V	2	2
		3010 axial fan 24V	1	1
		Omron Mouse Button – Micro Switch	3	4
		C13 Power Cord with Inline Switch	1	1
		Nylon PCB Standoff Kit	1	–	Provide in fasteners kit
		3M 5952 VHB tape	1	1
	Cables	Insulated Crimp Receptacle	4	0	No Provide
		Silicon Wire 24gauge 100ft	1	1	24AWG 7m/4P
		Thermal Fuse 125C	1	1
		JST connectors (2pin 3pin 4pin)	?	1	1 set
		Microfit3 Dual Row (10circuits) Male & Female Plug	1	0	No Provide
		7mm x 7mm cable chain (less than 1/2 meter needed)	1	1	1m
	Motion	F623-RS Bearing	20	24
		F688-RS Bearing	1	1
		KFL08 pillow bearing 8mm ID	1	1
		GT2 16T Toothed idler w/bearing (3mm ID 6mm W)	2	2
		GT2 20T (8mm ID 6mm W)	1	1
		GT2 20T (5mm ID 6mm W)	3	3
		GT2 Open Belt (6mm W) – 2000mm	1	1	Gates 2000mm
		110 gt2 belt loop	1	1	Gates
		T8x8 Lead Screw – 200mm	1	1
		T8 POM Anti-backlash Nut	1	1
	Build plate	MIC6 5/16″ Plate – 120x120mm	1	1
		Silicone AC 120V/240V Heater 100x100mm 100W	1	1
		PEI + 3M 468P (200MP)	1	0	No Provide
		yellow die springs 8x4x20mm	3	3
		Spring Steel Flex Buildplate 120x120mm (OPTIONAL)	1	0	No Provide
	Bowden	Bowden Fitting	1	3
		Bowden Tube – 1m	1	1
	Misc.	Little Rubber Feet	4	4
		6mm x 3mm Round Neodymium Magnets	8	10
	Pocketwatch	Bowden Fitting	1	1
		DIY BMG Extruder Kit	1	1